GAS STRUT-500N-P/No 46080 830mm

UES Part: GS820-500N

Installation Tips:

• Always install after painting, welding etc. 
• The gas strut should always be fitted with the piston pointing down. 
• Temperature range -30C to +80C.
• Use suitable end fittings and angle joints to avoid coupling jamming. 
• Gas struts are maintenance free, do not grease or lubricate shaft. 
• Install without twisting. 
• Avoid lateral forces. 
• Protect piston against dirt, paint or damage. 
• Output forces will vary approximately 4% for every 10C change in temperature.